HTTP API¶
TO DO - WRITE DESCRIPTION
http://xzg.local/api?action=X
| action ID | Description |
|---|---|
| 0 | API_GET_PAGE |
| 1 | API_GET_PARAM |
| 2 | API_STARTWIFISCAN |
| 3 | API_WIFISCANSTATUS |
| 4 | API_GET_FILELIST |
| 5 | API_GET_FILE |
| 6 | API_SEND_HEX |
| 7 | API_WIFICONNECTSTAT |
| 8 | API_CMD |
| 9 | API_GET_LOG |
| 10 | API_DEL_FILE |
| 11 | API_FLASH_ZB |
http://xzg.local/api?action=1¶m=X
| param | Description |
|---|---|
| refreshLogs | Refresh interval |
| zbFwVer | Zigbee firmware version |
| zbHwVer | Zigbee hardware revision |
| espVer | ESP32 firmware version |
| wifiEnable | WiFi enabled status |
| coordMode | Working mode (Network (0) or USB (1)) |
| all | All gateway configuration params in JSON object |
| vars | All gateway variables in JSON object |
| update_root | Realtime updating values |
| root | Values to update on root page load |
http://xzg.local/api?action=8&cmd=X
| cmd ID | Description |
|---|---|
| 0 | CMD_ZB_ROUTER_RECON |
| 1 | CMD_ZB_RST |
| 2 | CMD_ZB_BSL |
| 3 | CMD_ESP_RES |
| 4 | CMD_ADAP_LAN |
| 5 | CMD_ADAP_USB |
| 6 | CMD_LED_ACT |
| 7 | CMD_ZB_FLASH |
| 8 | CMD_CLEAR_LOG |
| 9 | CMD_ESP_UPD_URL |
| 10 | CMD_ZB_CHK_FW |
| 11 | CMD_ZB_CHK_HW |
| 12 | CMD_ZB_LED_TOG |
| 13 | CMD_ESP_FAC_RES |
| 14 | CMD_ZB_ERASE_NVRAM |
D!
http://xzg.local/api?action=5&filename=configHw.json
Pages
http://xzg.local/api?action=0&page=X
| page ID | Name |
| ------- | ----------------- |
| 0 | root |
| 1 | General settings |
| 2 | Network settings |
| 3 | API_PAGE_NETWORK |
| 4 | API_PAGE_ZIGBEE |
| 5 | API_PAGE_SECURITY |
| 6 | API_PAGE_TOOLS |
| 7 | API_PAGE_ABOUT |
| 8 | API_PAGE_MQTT |
| 9 | API_PAGE_VPN |